Advancement in the field of the computer has allowed everyone, ranging from different expert levels, to build circuits on software called Arduino Simulator.
There is a ton of software available online but all Arduino Simulator are not created equally. In this article, we are going to discuss some of the best Arduino simulators out there in the market.
What is Arduino?
Before listing some of the best Arduino simulators, it is beneficial to have a quick glance at what Arduino is.
Arduino is an open-source platform that is used to make extremely cool things such as an atomic clock, quadcopter, 3-D printers, and even electronic microscope, this list goes on and on.
You are probably familiar with the term integrated circuit or ICs. They nothing but a tiny computer that does computation. Back in the beginning days of Integrated Circuits, one must have proper knowledge of electronics and programming in order to use the ICS.
But thanks to Arduino, because of its use of a specific type of IC, the use of Integrated Circuit is simplified. Now because of this simplification, somebody with just basic knowledge of electronics and computers can use the IC.
The way they have accomplished this is by focusing on two things, that is the software and the hardware.
When it comes to simplifying the hardware, it looks like they know what they are doing.
The IC is readily accessible to the masses as the Arduino is nothing but a printed circuit board and on that printed circuit board we have the Integrated Circuit.
On the outside, they have a pin header that allows you to connect to the integrated circuit, and then the whole circuit is connected to the computer with a USB cable.
Arduino’s Software takes the whole simplification concept even further. The Arduino Integrated Circuit environment makes the whole programming experience easier than ever. It has some short programs that come really hand for someone who is not an expert in programming.
We have already mentioned the things that have been accomplished using Arduino or ICs in general. But the software has pretty cool things for beginners as well.
For example, if the sun is bright turn on the AC, or if I press that this will happen. This concept is logical computation. It is not limited to these simple tasks you can perform some complex tasks as well. For example, if the sun is bright and I press that then this will happen.
What is Arduino Simulator? ?
Arduino Simulator is software that packs all the good stuff of Arduino circuits in a virtual machine. Let’s understand this a little better.
Even though Arduino was made to simplify the whole process and the Arduino Simulator takes it to another level but it still needs hardware to work on. But the Arduino Simulator provides all the advantages of real-world Arduino but without the need for hardware.
Because of this factor, the use and demand of the Arduino simulator are likely to change the whole landscape of ICs and Computing in general.
Limitation of actual hardware use:-
Why do we need Arduino Simulator? This question can be pretty much answered by this section. So, let’s see the limitation of actual hardware:-
According to the developers, the maximum number of writes that a single Arduino flash memory can handle is 10,000times. It may sound a lot but this number can be achieved within two days by a moderate user and a heavy user and even reduce the number to 1 or 1.5 years.
For a single individual, this number the cost per Arduino is very low, somewhat near $30-40 but for an institute, this number can add up to become hefty.
Required less knowledge:-
The prime aim of Arduino was to make coding of ICs accessible to the masses, but since, you are connecting the circuit to the peripheral you still a decent knowledge of electronics and diodes, but because of the simulators software, this step is eliminated.
So now you just need to learn to program and you are ready to go.
This is again a hardware-specific problem. Arduino is not new but there are some specific regions in this world where one can not get Arduino or the institution can not get them in bulk. In those places, the Arduino Simulator comes handy. And even if you do get the board, you need to find components and they are difficult to find as well.
One can not discuss simulation without mentioning the Stimulation Model. The simulation model is the building block of the simulation circuit, they accumulate to form the simulation circuit.
Every simulation model contains information about the component that is to be used. So, if there is a component that you ought to use in your Arduino project then the library of the used software must have its information otherwise, your project won’t run.
Best Arduino Simulators: Our Top Pick ??
After learning about the Arduino and the Arduino Simulators, it is time to see some of the best Arduino software in the market. Here is the list of some of the best Arduino simulator out there in the market. This list is in no particular order.
1. PaulWare’s Arduino Simulator
This Arduino Simulator is an open-source software build by Paul with a motive to create a community where people can uploads videos and at the same time use the software to do wonders with that software called PaulWare’s Arduino Simulator (Download Here).
This software was built specifically for Windows and is one of the best software for someone who is just getting started. As it has one of the major components required for most of the Arduino-based project LED momentary switch, matrix keypad LCD Display, and many more.
As mentioned earlier, Paul wanted to create a learning platform and for this very purpose, he has also created a youtube channel that an Arduino aspirant should check.
Can iPads replace laptops? The answer to this question is pretty controversial but there are some developers who have started to believe in this theory and one of them developed a paid simulator for Apple’s iPad.
It is not a very complex software and therefore, is perfect for beginners and someone who wants to learn Arduino. You need to know the basics of C programming in order to create projects.
Simduino is available at just $3.99 and can be downloaded either from iTunes or its official store. But in our opinion, you should have a look at its official website before purchasing as it will give you a much broader perspective of what it can do.
This is where things get serious. ArduinoSim is a cross-platform software as it works on both Windows and Linux. It can be used by both beginners and experts.
Another thing that gives it an edge over the previously mentioned stimulators is that it is built on more advanced and easy-to-use python language.
It is free software that was made to cater to professionals such as engineers, developers, scientists, etc but then it became popular and is made for the masses.
It has many materials and equipment that one can use and after doing a quick analysis of this, one can say that it is a paradise for electrical engineers or someone interested in motors and generators.
4. Autodesk Eagle
If you are an engineer and love to design then this probably is the tool of your dream.
Autodesk Eagle has an array of PCB layouts and many different editing tools to play around with. This can be an asset for inventors as now they know which setup will work and which won’t.
Let’s see some of the features of the Autodesk Eagle.
- Autodesk Eagle provides its users with Schematic Editor making it an excellent choice for electronics and electrical peeps.
- They have a multi-sheet schematic system helping you in keeping your designs organized.
- They have Electrical Rule checking. It is a system designed to check the robustness of a design, inflecting confidence.
- They also have PCB Layout Design. So, that you can intricate and complex circuits on your computer.
- The Autodesk Eagle supports modern technology including DDR4 that amps up your read and write speed and eventually your experience.
- This probably is the best thing about the Autodesk Eagle that is User Language Programs(ULPs) that allows one to write code on any simple text editor with a very easy-to-understand language.
The aim of Arduini Simulator was to make a simple and yet effective software packed with all the required materials needed to innovate and Proteus is the closest it gets.
Because of its versatility, Proteus Arduino Simulator (Visit Here) can be used in almost all the field, from something as simple as education to something as precise as automation to something as innovative as the Internet of Things.
Its versatility can be measured by just looking at the tools that it provides such as Counter Timer, Oscilloscope, ammeters, voltmeter, bridges, etc.
Proteus has one of the most active communities because of the fact that it is not limited to just one platform, you can use them on either Windows or Linus.
One thing that makes them different from others is their aptness to communicate with any digital or analog electronics equipment connected.
Proteus can be a very handy and effective tool when it comes to saving you some extra cash from the hardware. Since it has all the common hardware you don’t need to purchase anything extra for testing purposes.
So, if you are looking for an Arduino simulator for your college or an institute then Proteus is your best bet as it can be good for education and at the same time innovation.
Virtronic (Visit Here) Simulator is an Arduino simulator for the masses. It packs all the great features of the Arduino simulator and makes it for education.
I say this because of the fact that Virtronics Simulator educated about the working of Arduino and the sketches. You can create a sketch and test it without needing to spend some extra cash on hardware. This can save some money and time as well.
Not only that Virtronics Simulator takes the hardwareless concept to another level. You can even share your sketch with the customer and ask for their opinions and make meaningful amendments. So this saves money and time even more.
Victronics Simulator has two tiers one is free and the other one is paid. You should first try the free version and if it works for you then go for the paid version. The license for the paid version is $19.99.
Another thing about this software is that it can also work on boards such as UNO and Mega and because of this the experience is high-end.
The software has tones of libraries, pointers, classes, structures, etc. So, Virtonics is one of the best Simulator if you want something for research purposes.
PSpice is one of the most common simulators out there in the market. It is simple that you can don’t need expert-level knowledge and it is advanced enough that you can any things that an expert would create.
It is a complete software with all the bells and whistles of the whole Arduino combination that is the hardware and the software. You can design circuits and check them for any failure.
It is a productivity machine and can be used for all kinds of stuff including but not limited to electrical and electronics circuits and PCB. And all this at a very low cost.
So, if you are a professional and want to create something magnificent without spending tons of money on the hardware then this probably is your best option.
This is for the creative demographic (Visit Here). It is just like any other simulator with tons of features but on top of that it has some creative material as well that you can use in order to inflate your own touch on your project.
And not only that it has a community filled with creative engineers that you must visit in order to get the ideas from. You can create a circuit, share it with others in order to get their feedback, process all the information, and then make some amendments to your circuit to create something exceptional.
PCB support allows you to customize one for yourself and too at a very low rate of less than $9.
Let’s look at some of the services of Fritzing:-
- Fritzing Lab: It gives you an option to turn your circuits into a PCB.
- Workshops: This is a place to learn, you will get classes about Arduino and designs that you can use to make circuits.
- Part Creation: If there is a project that you don’t want to do but want it to get completed then this is something
- Products: Fritzing has an array of different products such as educational classes and material kits.
9. Emulate Arduino Simulator
Emulate Arduino (Download Here) is the best simulator for someone interested in multitasking. If you are someone looking to create multiple circuits at the same time then you must consider the Emulate Arduino SImulator.
This can work on both Windows and Linux making it a cross-platform workhorse.
If we look at the material that it provides then by looking at the switches, diodes, LED, and other material then we can conclude that its main focus was to cater to the electrical and electronic demographic.
So, if you are interested in electrical or electronic filed then this probably is the best option for you as it provides all the important features for free.
Yenka is one of the most versatile simulators because of the material that it provides that a student to a young professional will find interesting and can use for teaching skills.
Yenka provides the same features and more as all other Arduino simulators provide. Whether creating ideas and sketches or creating puzzled projects without any help from hardware inputs.
It can function properly on Linux as well as Windows making it easy for you to either create circuits on the friendly Windows OS or more feature-driven Linus OS.
So, if electricals and electronics is something that intrigued you or you want something for your institute then Yenka is your best option.
11. Tinkercad Circuit
Tinkercad in our opinion is one of the most feature-driven Arduino simulators if not the most. This is the same as Autodesk and is for professionals. One who wants a circuit that can be actually used in the real world.
As the name suggests it adds the CAD application to the mix increasing the material that you can get. So, if you are a civil engineer then you should use this. As you can create buildings and circuits on this application.
If you are wondering that it is because of the additional CAD facility it sacrifices on the Arduino and circuit side of the things then you are wrong. It packs all the features that you will get by using the Autodesk Eagle and adds CAD features to it.
So, if you are serious about designing and everything required in a single place then the Tinkercad Circuit is the way to go.
LTSpice is another free Arduino simulator that can be used by a wide demographic because of its versatility. You can create circuits on it and be reassured that the circuit will work in the real life.
There are a lot of ways by which you can test your circuit such as a Waveform generator. This is one of the coolest features of the LTSpice simulator as you can see the real-world impact of your circuits.
It works on both Windows and MAC making it usable to a wide range of viewers. So, it checks most of the boxes and is a great learning tool.
13. Circuit Lab
According to the manufacturer of the Circuit Lab Arduino simulator (Visit Here), it is easy to use and is powerful enough that you can create all sorts of circuits, and well it is just that.
Even though it can be used by anyone but the ones who will be able to enjoy this the most would be electrical or electronic engineers. It helps you to research the inner working of Arduino and create sketches that will be useful in your learning process.
But apart from all the perks that it has there is one disadvantage that is the price. It is not very expensive but since it’s for learning purposes, the price is a bit on the higher side.
But if you can look past that price you will notice that the community is very good and there are enough learning materials that will help you in the long run.
14. EasyEDA Simulator
If you need something to work on your Android Smartphone then the EasyEDA Simulator ( Visit Here) is your best. Its main feature is the fact that it can pack all the bells and whistles of a normal Arduino Simulator that you use on Windows or Linux and can work on Android, Mac, Linus, and Windows making it the true portable software.
You can be riding an uber and creating something that can change the world on your 6inch Samsung or pixel device.
But there is a caveat here, it is not free but if we keep that aside we will see that it can work on pretty much any device and is probably the only one that can do it.
In this article, we have seen what the Arduino and Arduino simulator is and its advantages over the hardware. Then we saw 15 of the best Arduino Simulator out there in the market including some free ones, some that can work on all the major platforms and some that can be used both to make circuits and do some CAD work as well.
In the end, we would like to conclude that no simulator is perfect so you need to choose wisely.